Yokogawa Gauge Pressure Transmitter EJX530A[Product print page]

Product Name: Yokogawa Gauge Pressure Transmitter EJX530A

Product Type: EJX530A

Exhibitors: Honeywell

Product Documentation: No Related Documents

Brief

Yokogawa Gauge Pressure Transmitter EJX530A. Please contact us: tekrachel @ 163.com

Detailed description

Manufacturer: Yokogawa Electric Corporation

Yokogawa Gauge Pressure Transmitter EJX530A

The high performance absolute and gauge pressure transmitter EJX510A and EJX530A feature single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam pressure.

EJX510A and EJX530A output a 4 to 20 mA DC signal corresponding to the measured pressure.

It also features quick response, remote setup and monitoring via BRAIN or HART communications, diagnostics, and optional status output for pressure high/low alarm.

The multisensing technology provides the advanced diagnostic function to detect such abnormalities as an impulse line blockage or heat trace breakage. FOUNDATION Fieldbus and PROFIBUS PA protocol types are also available.

All EJX series models in their standard confguration, with the exception of the Fieldbus and PROFIBUS types, are certifed by TÜV as complying with SIL 2 for safety requirement.

SPECIFICATIONS

Yokogawa Gauge Pressure Transmitter EJX530A

		EJX510A and EJX530A
		Absolute and Gauge Pressure Transmitter
		(Measurement values below are in absolute for EJX510A)
		A Capsule	B Capsule	C Capsule	D Capsule
Range	EJX510A	0 to 200 kPa	0 to 2 MPa	0 to 10 MPa	0 to 50 MPa
		(0 to 29 psi)	(0 to 290 psi)	(0 to 1450 psi)	(0 to 7200 psi)
	EJX530A	-100 to 200 kPa	-0.1 to 2 MPa	-0.1 to 10 MPa	-0.1 to 50 MPa
		(-14.5 to 29 psi)	(-14.5 to 290 psi)	(-14.5 to 1450 psi)	(-14.5 to 7200 psi)
Span		8 to 200 kPa	0.04 to 2 MPa	0.2 to 10 MPa	1 to 50 MPa
		(1.16 to 29 psi)	(5.8 to 290 psi)	(29 to 1450 psi)	(145 to 7200 psi)
Accuracy		±0.1%	±0.1%	±0.1%	±0.1%
Degrees of protection		IP67, NEMA 4X and JIS C0920 immersion proof
Certificates		FM, CENELEC ATEX, CSA, IECEx
Output		4 to 20 mA DC or FOUNDATION™ fieldbus, 2-wire system with digital communication
Supply voltage		BRAIN and HART:10.5 to 42 V DC
		(10.5 to 30 V DC for Intrinsically safe type)
		Fieldbus:9 to 32 V DC
		(9 to 24 V DC for Entity and 9 to 17.5 V DC for FISCO)
Ambient temperature		-40 to 85 deg C (-40 to 185 deg F) (general use type)
		-30 to 80 deg C (-22 to 176 deg F) (with integral indicator)
Process temperature		-40 to 120 deg C (-40 to 248 deg F) (general use type)
Maximum overpressure		4 MPa	4 MPa	20 MPa	75 MPa
		(580 psi)	(580 psi)	(2900 psi)	(10800 psi)
Mounting		Direct mounting/2-inch pipe mounting
Wetted parts material	Capsule	Hastelloy C-276
	Process connection	316L SST, Hastelloy C-276
Housing		Cast aluminum