Product Information

Yokogawa Immersion Fitting FD40S28-20-NC-FN*B/M[Product print page]

Product Name: Yokogawa Immersion Fitting FD40S28-20-NC-FN*B/M
Product Type: FD40S28-20-NC-FN*B/M
Exhibitors: Yokogawa
Product Documentation: No Related Documents

Brief

Yokogawa Immersion Fitting FD40S28-20-NC-FN*B/M, Yokogawa Immersion Fitting FD40S28-20-NC-FN*B/M. Please contact us: tekrachel @ 163.com

 Detailed description

Yokogawa Immersion Fitting FD40S28-20-NC-FN*B/M

Model FD40 Immersion Fittings for conductivity measuring loops
For installing conductivity sensors in a permanent or semi-permanent location, the program of Yokogawa includes a range of flow and immersion fittings.

Yokogawa Immersion Fitting FD40S28-20-NC-FN*B/M is for installing conductivity sensors in tanks, open vessels or drains. The constructions of PVC and stainless steel suit most process conditions, considering chemical resistance, pressure and temperature specifications. The fittings of stainless steel might be used in sanitary applications. A mounting flange can be ordered.


Features
• Designed for mounting conductivity sensors in tanks, open vessels and drains.
• Easy mounting, service and removal or replacement of sensors.
• High pressure and temperature specifications.
• With or without flanged connection.
• Stainless steel construction for sanitary applications.

• Several lengths available.


From a practical plant aspect, Yokogawa Immersion Fitting FD40S28-20-NC-FN*B/M should be installed in a site, where the point of measurement truly represents the entire solution. Avoid areas where the measurement varies significantly. If the fitting is mounted in a tank with agitator, or if it is placed in a fast flowing process, care must be taken that the fitting is adequately supported. Select a mounting place where the sensor is always immersed in the process liquid.

General Specifications
Yokogawa Immersion Fitting FD40S28-20-NC-FN*B/M

Wetted parts Materials
a. Body : Stainless steel AISI 316 (SS) Polyvinylchloride (PVC)

b. O-rings : Silicone rubber 
Sensor cable : Six wire multicore, covered with thermoplastic PVC length: 5.5 m or 10 m
Blanking plug* : Ryton R4
Weight (without flange) : a. PVC fitting 1.7 kg
                                             b. SS fitting 4.5 kg
* This plug is for test applications only and must be removed before mounting the sensor.


Functional Specifications
Yokogawa Immersion Fitting FD40S28-20-NC-FN*B/M

Temperature
Min. : -10ºC (14 ºF)
Max. : Depending on material and application
Immersion length fitting : 0.5 to 2.0 m (in steps of 0.1 m)