Yokogawa Conductivity Sensor SC4A-S-AD-15-002-10-T1/PS[Product print page]

Manufacturer: Yokogawa Electric Corporation

Yokogawa Conductivity Sensor SC4A-S-AD-15-002-10-T1/PS

Insertion Sensors
Stainless steel or Titanium 2-electrode sensors with cell constants of 0.02 cm-1, 0.10 cm-1, and fixed cables 3 to 20 meters in length.

Intended for the low conductivity applications found in the semi-conducter, power, water and pharmaceutical industries, these sensors are designed in a convenient compact style. There are several mounting possibilities, including a compression gland, giving a simple effective method of direct insertion in process pipework.The sensors are made from a combination of wetted materials approved by FDA. This makes them ideally suited for the monitoring of pure water systems used in the preparation of injectable solutions. For this kind of application, sanitary clamp mountings are most often used. As with all Yokogawa Conductivity Sensor SC4A-S-AD-15-002-10-T1/PS, the cell constants are individually calibrated in our laboratories using an ASTM method traceable to NIST international standards.

Features for Yokogawa Conductivity Sensor SC4A-S-AD-15-002-10-T1/PS

• Precise individually calibrated cell constant
• Fast temperature response
• Built-in Pt1000 temperature sensor
• Fixed cable length 3, 5, 10, 15 or 20 mtr
• Direct process insertion
• Wide range of mountings
• Compatible with PR4A retractably assembly
• The sensor is polished to meet pharmaceutical requirements as Yokogawa Conductivity Sensor SC4A-S-AD-15-002-10-T1/PS

Product Selection of Yokogawa Conductivity Sensor SC4A-S-AD-15-002-10-T1/PS

Model Code	SC42 Large Bore	SC4A	SC42 Small Bore
Cell Constants	0.01/cm; 0.1/cm; 1.0/cm	0.02/cm; 0.1/cm	0.02/cm; 0.1/cm; 1.0/cm
Ranges	0.02-2,000 µS/cm; 0.2-20,000 µS/cm; 2.0-200,000 µS/cm	0.04-400 µS/cm; 0.2-2,000 µS/cm	0.04-400 µS/cm; 0.4-2,000 µS/cm; 4.0-5,000 µ/cm
Temperature Element	Pt1000	Pt1000	Pt1000
Pressure Rating	10 bar/142 PSIG	10 bar/142 PSIG	7 bar/100 PSIG
Maximum Temperature	150°C/302°F	110°C/230°F	100°C/212°F
Installation Connections	Requires FD40, FS40 or FF40 Holder	3/4" NPT Fitting; 1", 1.5" or 2" Tri-Clamp; Retractable	3/4" NPT Fitting; 1", 1.5" or 2" Tri-Clamp
Integral Cable	NO	YES	YES
Materials Of Construction	316 Stainless Steel	316 Stainless Steel or Titanium	316 Stainless Steel or Titanium
Design Sytle	2-Electrode	2-Electrode	2-Electrode