Manufacturer: Yokogawa Electric Corporation
Yokogawa Duplexed Field Control Unit AFG30D-H4123 for V net and FIO
HARDWARE SPECIFICATIONS
For the installation specifications and the environmental conditions common to the systems, refer to 'System Overview (GS 33K01A20-50E).'
Processor
VR5432 (133 MHz)
Main Memory Capacity
AFS30S, AFS30D: 16 Mbyte
AFG30S, AFG30D: 32 Mbyte
Memory Protection During Power Failure
Battery
4 Back-up for Main Memory: Max. 72 hours
Battery Recharge Time: Min. 48 hours
FCU Status Contact Output
2 terminals (NC, C)
Contact Points open during FCU failure
Contact Rating: 30 V DC, max. 0.3 A
Communication Interface
V net Interface: Dual-redundant
ESB bus interface: Dual-redundant or Single
No. of Node Units Connectable
Local Node units: Max.10/FCU
Remote Node units:
Max. 9/FCU
Max. 8/ER Bus
When both Local and Remote Node units used:
Max.10/FCU
However, when using Remote Node Expanded FCS database type at FCU model AFG30S or AFG30D,
No. of Node comes to be shown below.
Local Node units: Max.10/FCU
Remote Node units:
Max.14/FCU
Max. 8/ER Bus
When both Local and Remote Node units used:
Max.15/FCU
Yokogawa Duplexed Field Control Unit AFG30D-H4123 for V net and FIO
Power Supply
(specify with Suf?x Codes)
Voltage: 100-120 V AC, Frequency: 50/60 Hz
Voltage: 220-240 V AC, Frequency: 50/60 Hz
Voltage: 24 V DC
Power Consumption
100-120 V AC: 250 VA (AFS30S, AFG30S)
400 VA (AFS30D, AFG30D)
220-240 V AC: 250 VA (AFS30S, AFG30S)
410 VA (AFS30D, AFG30D)
24 V DC: 4.5 A (AFS30S, AFG30S)
8 A (AFS30D, AFG30D)
Weight
Approx. 20 kg (AFS30S, AFG30S)
Approx. 25 kg (AFS30D, AFG30D)
Yokogawa Duplexed Field Control Unit AFG30D-H4123 for V net and FIO
Mounting
19-inch Rack Mounting:
Rack mount (M5x8 screws)
Insulation bush (accessory)
Connection
Power Supply: M4 screw terminal connection
Grounding: M4 screw terminal connection
Contact Output: M4 screw terminal connection
Regulatory Compliance
For the detailed information of following standards, see Integrated Production Control System CENTUM VP System
Overview (GS 33K01A20-50E).
Safety Standards
[CSA] (for 100-120 V AC power supply)
[CE Marking] (for 220-240 V AC power supply)
EMC Conformity Standards
[CE Marking] (for 220-240 V AC and 24 V DC power supply)
[C-Tick Marking] (for 220-240 V AC and 24 V DC power supply)
[KC Marking] (for 220-240 V AC and 24 V DC power supply)
Yokogawa Duplexed Field Control Unit AFG30D-H4123 for V net and FIO
MODEL AND SUFFIX CODES
Duplexed Field Control Unit (19-inch Rack Mountable Type)
|
|
|
Description
|
|
Model
|
AFG30D
|
Duplexed Field Control Unit (for V net and FIO, for 19” Rack Mountable)
|
|
Suffix Codes
|
-H
|
Standard Type (Main memory 32 Mbyte)
|
|
4
|
Dual-Redundant V net, Dual-Redundant ESB bus
|
|
E
|
Dual-Redundant Vnet, Dual-Redundant ESB bus with SOE interface (*1)
|
|
1
|
Always 1
|
|
1
|
100–120 V AC Power Supply
|
|
2
|
220–240 V AC Power Supply
|
|
4
|
24 V DC
|
|
3
|
LFS1330 Basic software license for Control Function for Enhanced Field Control Station(for V net and FIO, for CP345)
|
*1: Please order one terminator (Model YCB128) required on the IRIG-B branch unit at the FCS that comes at the end of the RS-422 time synchronization link.