Yokogawa ALP121 Profibus Dp Communication Module ALP121-S00[Product print page]

Manufacturer: Yokogawa Electric Corporation

Yokogawa Profibus Dp Communication Module ALP121 for FIO,EIA-RS-485-compliant,Isolated between filed and the system,0.7 A

Yokogawa Profibus Dp Communication Module ALP121 for FIO

Yokogawa ALP121 Profibus Dp Communication Module ALP121-S00

This module performs as the PROFIBUS-DP master device (referred to as the master device) to communicate and exchange data with PROFIBUS-DP slave devices (*1) (referred to as the slave device).

This PROFIBUS-DP communication module can be mounted on field control units (AFV30 , AFV40 ). It can also be mounted on the ESB bus node unit (ANB10) and the optical ESB bus node unit (ANB11 ) which are connected to AFV30 or AFV40 .

*1: The PROFIBUS-DP slave devices represent the field bus devices connected to a PROFIBUS-DP communication cable.

PROFIBUS remote I/O, PLC, and others are among the PROFIBUS-DP slave devices. HART devices and 4-20 mA analog equipment are connected to PROFIBUS remote I/O. ALP121 module can also be connected with PROFIBUS-PA devices via a PROFIBUS DP/PA coupler and refer to the PROFIBUS-PA device data. Yokogawa ALP121 Profibus Dp Communication Module ALP121-S00

HARDWARE SPECIFICATIONS

Hardware specifications for ALP121 PROFIBUS-DP communication module are as shown below.

      PROFIBUS-DP Communication Module Hardware Specifications

*1: The cables, connectors, and terminators must comply with PROFIBUS-DP standards (PROFIBUS Specifications IEC61158-2 type3).