Yokogawa Analog Insulation Tester MY10-04 (Discontinued)[Product print page]

Product Name: Yokogawa Analog Insulation Tester MY10-04 (Discontinued)

Product Type: MY10-04

Exhibitors: Yokogawa

Product Documentation: No Related Documents

Brief

Yokogawa Analog Insulation Tester MY10-04 (Discontinued), Analog models with single rating, AC voltage measurement, Yokogawa Analog Insulation Tester MY10-04 (Discontinued).

Detailed description

Manufacturer: Yokogawa Electric Corporation

Yokogawa Analog Insulation Tester MY10-04 (Discontinued)

Yokogawa Insulation Tester

Yokogawa Portable and Handheld Instrument

Yokogawa Analog Insulation Tester MY10-04 (Discontinued)

MY40 DIGITAL INSULATION TESTER

-Digital model with 4 voltage/resistance ratings

-Multifunction

*Insulation resistance, AC voltage and conductor resistance measurement

*Insulation test mode: Comparator, memory, auto-hold and discharge functions

*All test modes: Live-line alarm (excluding AC voltage measurement), battery check and automatic power-off

-Easy-to-view, fluctuation-free display

-Double-action safety mechanism

-Weight including main unit and batteries only, excluding accessories

Specifications - MY40-01 Digital Insulation Tester

Yokogawa Analog Insulation Tester MY10-04 (Discontinued)

Width	125 mm
Height	103 mm
Depth	53 mm
Display	3 1/2-digit LCD; 4000 count; backlight-illuminated; logarithmic bar graph; extension bar graph-no fluctuations, as the display shows the digits of a reading in the order in which each digit settles.
Comparator Function	The MY40 alerts you by turning on the LOW symbol and sounding the buzzer if the measured value is smaller than the reference value. You can allocate as many as three user-defined reference values to each rating. The factory-set defaults are 0.1 MΩ, 0.2 MΩ and 0.4 MΩ.
Memory Function	For each rating, you can save as many as 20 measurements at desired memory address numbers.
Automatic Discharge Function	The MY40 automatically begins discharge when you turn off the MEAS switch. You can monitor the state of discharge by checking the bar graph and make sure discharge is complete by checking that the segment bar disappear.
High-Voltage Indicators	The high-voltage symbol and LED lamp come on to alert you when the MY40 is in insulation testing mode or if any voltage remains to be discharged.
Live-Line Alarm	If you apply an AC voltage of approximately 40 V or higher across the input terminals, the MY40 alerts you by blinking the LED lamp and sounding the buzzer.
Overrange Input Alarm	If the voltage being measured exceeds 600 V during AC voltage measurement, the MY40 alerts you by flashing the Maximum Value indicator and sounding the buzzer.
Auto-Hold Function	The tester retains the measured resistance for approximately 5 seconds after the MEAS switch is turned off.
Batteries	Four AA (R6P) batteries
Weight	420 g
Ambient Temperature/Humidity Ranges	23 ±5 /45-75% RH
Standard Accessories	Batteries (Qty - 4) Earth Probe (98002) (Qty - 1) Line Probe (98001) (Qty - 1) Protection Cover (93013) (Qty - 1) Shoulder Strap (99005) (Qty - 1) User's manual (Qty - 1)

Yokogawa Analog Insulation Tester MY10-04 (Discontinued)