Yokogawa Connector Terminal Block Unit TA50-0N[Product print page]

Manufacturer: Yokogawa Electric Corporation

Yokogawa Connector Terminal Block Unit TA50-0N

General
The TA50-0N ,TA50-1N and TA50-2N Connector Terminal Block Units are intended for use in the input/output modules that conform to the connector
specifications of the FA-M3 Range-free Multi-controller
- The TA50-0N and TA50-1N are connected to an input/output unit via the KM55-0xx Connector Terminal Block, which saves space and reduces wiring on the power switch board.
- Use of the connector terminal block unit with the connector terminal block cable eliminates soldering work for wiring.
- The TA50-0N and TA50-1N can be secured with mounting screws or DIN rails.

Specifications

Yokogawa Connector Terminal Block Unit TA50-0N

Weight: 300 g                                                        Number of points : 40

Rated voltage:  5-24 V DC                                   Clamping screw:  M4 (2 points)

Maximum current : 0.5 A DC / 1 point                Applicable conductor size:  2 mm2 max. 

Operating voltage range:  4.5 - 26.4 V DC
Mounting method : 35-mm wide DIN rail or screw mounting

Connector : HIF3BA-40PA-2.54DSA (71)(MIL standard compliant)

Model and Suffix Codes

Yokogawa Connector Terminal Block Unit TA50-0N