Yokogawa Positioning Modules (with Analog Voltage Output) F3NC51-0N[Product print page]

Manufacturer: Yokogawa Electric Corporation

Yokogawa Positioning Modules (with Analog Voltage Output) F3NC51-0N

General
The F3NC51-0N and F3NC52-0N are positioning modules with voltage output for velocity control for the FA-M3 series.
• One module can control both 1- and 2-axis motors.The modules support incremental and absolute encoder inputs.
• The modules are provided with simultaneous multi-axis control functions. When activated by a CPU module, these modules can perform a variety of smooth position control functions including multi-axis linear interpolation, velocity control functions and velocity/position control mode switching.
• The modules feature a short startup time of 6 ms maximum, on-route mode operation, internal-/externaltrigger-driven wait operation and position detection/positioning completion interrupt.These functions allow the modules to start at high speed and synchronize their operation with that of peripheral devices.

Specifications
Startup time:    6 ms max.                                                  Control Velocity control output:   -10 to 10 V

Data backup:   Backup using the CPU module                      External contact output:   Servo on, driver reset and brake off

Model and Suffix Codes
Control Encoder:Absolute encoder:See the section on the next page for applicable.

Incremental encoder (phaseA/B):Line driver in 2M pps max. /4-time multiplication mode

Control system:   Semi-closed loop control (with voltage output for velocity control) based on encoder feedback
External contact input:  Limit switch, driver alarm, home position,external trigger, general-purpose input and emergency stop encoding systems.

Model and Suffix Codes

Yokogawa Positioning Modules (with Analog Voltage Output) F3NC51-0N