Yokogawa PLC FA-M3 FA-bus Type 2 Module F3LR02-1W[Product print page]

Manufacturer: Yokogawa Electric Corporation

Yokogawa PLC FA-M3 FA-bus Type 2 Module F3LR02-1W

General
The F3LR02-1W is an interface module for constructing a system that requires distributed placement of multiple modules. The user can build up an efficient remote I/O system by installing F3LR02-1W modules in the FA-M3 main- and sub-units and connecting them via a FA-bus.
With the 10-Mbps high-speed communication capability of the F3LR02-1W, the user does not have to worry about the I/O refresh time in ladder programming.Yokogawa PLC FA-M3 FA-bus Type 2 Module F3LR02-1W
 All I/O module types and most special module types* can be installed in sub-units and accessed just like modules installed in the main unit.*：See "Restrictions on System Configuration"
Both daisy-chain and loop configuration options are supported.Yokogawa FA-bus Type 2 Module F3LR02-1W
The loop system is switched into two pairs of daisy-chain systems when a disconnection occurs in the system.
Yokogawa PLC FA-M3 FA-bus Type 2 Module F3LR02-1W
Specifications

Weight：105 g
Transmission speed：10 Mbps

Transmission distance：
Maximum total distance:70m
Maximum distance between stations: 10 m
External dimensions：28.9 (W) x 100 (H) x 83.2 (D) mm
Transmission media：two-pair (4-wire) shielded cable(impedance 100Ω)
Installation location：Must be installed inside panel enclosure or system
Surrounding atmosphere：Must be free of corrosive gases, flammablegases or heavy dust
RAS features：Shutdown I/O contact output on transmission channel error, reporting of transmission channel error location
Yokogawa PLC FA-M3 FA-bus Type 2 Module F3LR02-1W
Model and Suffix Codes