Manufacturer: Yokogawa Electric Corporation
Yokogawa Field Control Unit AFV10D-S412E1
for Vnet/IP and FIO, with 19 inch rack mountable type
Hardware Specifications
Yokogawa Field Control Unit AFV10D-S412E1, for Vnet/IP and FIO, with 19 inch rack mountable type
Processor
VR5432 (133 MHz)
Main Memory Capacity
32 Mbyte
Memory Protection During Power Failure
Battery
Battery Back-up for Main Memory: Max. 72 hours
Battery Recharge Time: Min. 48 hours
FCU Status Contact Output
2 terminals (NC, C)
Contact Points open during FCU failure
Contact Rating: 30 V DC, max. 0.3 A
Communication Interface
Vnet/IP Interface: Dual-redundant
Module configuration
Power Supply Module (PW481 or PW482 or PW484):
Two modules in case of a dual-redundant configuration.
Processor Module (CP451): Two modules in case of a dual-redundant configuration.
I/O Modules(*1): Max. 8
*1: Non-standard components.
ESB Bus Node Units Connection
Yokogawa Field Control Unit AFV10D-S412E1
When connecting an ESB Bus Node Unit to FCU, install ESB Bus Coupler Module (EC401) on FCU. EC401 must be installed in slot 7 and slot 8. For the dual-redundant configuration of the processor modules, EC401 must be installed in both slot 7 and slot 8.
In case ESB Bus has a single configuration, EC401 must be installed in slot 7 and keep slot 8 empty.
Weight
Approx. 7 kg (AFV10S)
Approx. 8 kg (AFV10D)
Regulatory Compliance
Yokogawa Field Control Unit AFV10D-S412E1
For the detailed information of following standards, see “System Overview (Vnet/IP Edition)” (GS 33K01A10-50E).
Safety Standards
[CSA] (for 100-120 V AC power supply)
[CE Marking] (for 220-240 V AC power supply)
EMC Conformity Standards
[CE Marking] (for 220-240 V AC and 24 V DC power supply)
[C-Tick Marking] (for 220-240 V AC and 24 V DC power supply)
[KC Marking] (for 220-240 V AC and 24 V DC power supply)
Standards for Hazardous Location Equipment
[FM Non-Incendive] (for 100-120 V AC, 220-240 V AC and 24 V DC power supply)
[Type n] (for 24 V DC power supply) Yokogawa Field Control Unit AFV10D-S412E1
