Yokogawa Field Control Unit AFV10D-S411E1[Product print page]

Manufacturer: Yokogawa Electric Corporation

Yokogawa Field Control Unit AFV10D-S411E1

for Vnet/IP and FIO, with 19 inch rack mountable type

Hardware Specifications

Yokogawa Field Control Unit AFV10D-S411E1, for Vnet/IP and FIO, with 19 inch rack mountable type  

Processor

VR5432 (133 MHz)

Main Memory Capacity

32 Mbyte

Memory Protection During Power Failure

Battery

Battery Back-up for Main Memory: Max. 72 hours

Battery Recharge Time: Min. 48 hours

FCU Status Contact Output

2 terminals (NC, C)

Contact Points open during FCU failure

Contact Rating: 30 V DC, max. 0.3 A

ESB Bus Node Units Connection

Yokogawa Field Control Unit AFV10D-S411E1

When connecting an ESB Bus Node Unit to FCU, install ESB Bus Coupler Module (EC401) on FCU. EC401 must be installed in slot 7 and slot 8. For the dual-redundant configuration of the processor modules, EC401 must be installed in both slot 7 and slot 8.

In case ESB Bus has a single configuration, EC401 must be installed in slot 7 and keep slot 8 empty.

Weight

Approx. 7 kg (AFV10S)

Approx. 8 kg (AFV10D)

Regulatory Compliance

Yokogawa Field Control Unit AFV10D-S411E1

For the detailed information of following standards, see “System Overview (Vnet/IP Edition)” (GS 33K01A10-50E).

Safety Standards

[CSA] (for 100-120 V AC power supply)

[CE Marking] (for 220-240 V AC power supply)

EMC Conformity Standards

[CE Marking] (for 220-240 V AC and 24 V DC power supply)

[C-Tick Marking] (for 220-240 V AC and 24 V DC power supply)

[KC Marking] (for 220-240 V AC and 24 V DC power supply)

Standards for Hazardous Location Equipment

[FM Non-Incendive] (for 100-120 V AC, 220-240 V AC and 24 V DC power supply)

[Type n] (for 24 V DC power supply)

Yokogawa Field Control Unit AFV10D-S411E1

Insulating Partition Kit

Configuration of Insulating Partition Kit