Product Information

Yokogawa Base Module NFBU050-S15[Product print page]

Product Name: Yokogawa Base Module NFBU050-S15
Product Type: NFBU050-S15
Exhibitors: Yokogawa
Product Documentation: No Related Documents

Brief

Yokogawa Base Module NFBU050-S15, Yokogawa Base Module NFBU050-S15, STARDOM, High-performance, high-reliability modular controller


 Detailed description

Brand: Yokogawa.  Manufacturer: Yokogawa Electric Corporation

STARDOMFCN, FCN-500, FCN-100, FCN-RTU, FCJ

Yokogawa Base Module NFBU050-S15

Features

Yokogawa Base Module NFBU050-S15

• High-performance, high-reliability modular controller
• Memory with ECC
• Low heat dissipation eliminates the need for a fan
• A wealth of RAS features -CPU self-diagnostics, temperature monitoring, I/O diagnostics, and more
• The CPU, power supply module, local bus (SB bus), and control network can all be duplexed, and all modules are hot-swappable.  
• Can function as link active schedulers (LASs) for low-speed voltage mode (H1) FOUNDATION Fieldbus segments, and link up FOUNDATION Fieldbus-enabled field devices.

Configuration

Yokogawa Base Module NFBU050-S15

An FCN-100 consists of the following: 
• Base module
• Power supply module
• CPU module
• SB bus repeat module (extending the SB bus, the local bus for FCNs, to connect an extension unit)
• I/O modules
There are two types of base module.
- NFBU200 base module (long): Up to 2 extension units connectable for I/O expansion
- NFBU050 base module (short): Compact and dedicated to one-unit-configuration

Maximum I/O Module Configurations

Base Module

Unit Configuration

Standard

Duplexed (*1)

 

 

NFBU200 base module (long)

Control unit only

Max. 8 modules

Max. 6 modules

With 1 extension unit

Max. 16 modules

Max. 12 modules

With 2 extension unit

Max. 25 modules

Max. 20 modules

NFBU050 base module (short)

Control unit (*2)

Max. 3 modules

Not applicable (*3)

*1: When CPU and SB bus repeat modules are duplexed
*2: SB bus repeat modules cannot be mounted on NFBU050.
*3: Neither power supply nor CPU modules can be duplexed on NFBU050.

Installation Requirements

Yokogawa Base Module NFBU050-S15

Item

Specification

 

Ambient temperature

Operation

0° to 55°C

Transportation/storage

40° to 85°C (*1)

 

Ambient humidity

Operation

5 to 95 %RH (no condensation)

Transportation/storage

5 to 95 %RH (no condensation)

Rate of change in temperature

Operation

Within ±10°C/h

Transportation/storage

Within ±20°C/h

Dust

0.3 mg/m3 or less

Protection class

IP20

Resistance to corrosive gases

ANSI/ISA S71.04 Class G2 (Standard) (ANSI/ISA S71.04 Class G3, option)

Resistance to vibration

0.15 mm P-P (5 to 58 Hz), 1 G (58 to 150 Hz)

Resistance to shock

15 G, 11 ms (during power-off, for sine half-waves in XYZ-directions)

Altitude

2000 m or less

 

Noise

Electric field

3 V/m or less (26 MHz to 1 GHz)

Magnetic field

30 A/m (AC) or less, 400 A/m (DC) or less

Electrostatic discharge

4 kV or less contact discharge, 8 kV or less aerial discharge

 

Grounding

Apply the grounding system which is defined by the rules and standards of the country or the region.

Cooling

Natural air cooling

*1: System clock may be reset if the temperature falls below -10°C.

Base Module

Yokogawa Base Module NFBU050-S15

Model and Suffix Codes

Base Module (long)

 

 

Description

Model

NFBU200

Base module (long)

 

 

 

 

Suffix Codes

-S

Standard type

0

19-inch rack-mounted

1

DIN rail-mounted

5

Basic type with no explosion protection

6

With ISA Standard G3 option and no explosion protection

E

Basic type with explosion protection

F

With ISA Standard G3 option and explosion protection

 Base Module (short)

 

 

Description

Model

NFBU050

Base module (short)

 

 

 

Suffix Codes

-S

Standard type

1

DIN rail-mounted

5

Basic type with no explosion protection

6

With ISA Standard G3 option and no explosion protection

E

Basic type with explosion protection

F

With ISA Standard G3 option and explosion protection

 Optional Accessories

 

 

Description

 

Model

NFDCV01

Dummy cover for I/O module slot

NFDCV02

Dummy cover for power supply module slot

Specifications


Item

Specification

Model

NFBU200-S0£

NFBU200-S1£

NFBU050-S1£

Weight

1.9 kg

1.0 kg

0.58 kg

Dimensions (W x H x D)

482.6Í132.5Í40.5 mm

440Í131Í42.3 mm

283Í131Í24.2 mm

Mounting

19-inch rack-mounted

DIN rail-mounted

Maximum power consumption

5 V

Self-consumption

0.4 A(max)

0.025 A

24 V

Self-consumption

0