Yokogawa Conductivity Cable WU40-LH10[Product print page]

Yokogawa Conductivity Cable WU40-LH10                            

These cables are for use with the Yokogawa conductivity cells fitted with a cable connector. The plug/socket connection between cell and cable meets the requirements of IP65.

The connector of the cable has a secure screw connection with simple wiring mode. The gilded contacts ensure good electrical contact to the connector of the conductivity cell.

Yokogawa Conductivity Cable WU40-LH10 is six wire multicore and covered with a thermoplastic PVC. The wires are also covered with thermoplactic PVC individually and coloured.

Yokogawa Conductivity Cable WU40-LH10 connections are supplied with 2 mm contact pins for connection to the transmitter, preamplifier or connection box: these pins guarantee a correct and simple connection to the terminals.

Technical Specifications

Yokogawa Conductivity Cable WU40-LH10

Cable length : 1, 2, 51/2, 10, 15, 20 or 25 m

Temperature range : -10 ºC to +80 ºC

Wire resistances : approx. 18.10-3 Ω/m

Capacity core/core/screen : max. 130 pF/m

Isolation resistance between cores and screen : approx. 109 Ω/m (20 ºC)

Connector contact resistance : < 8 mΩ

Models and Suffix Codes

Yokogawa Conductivity Cable WU40-LH10

K1500FX         Set of 5 0-rings for sealing the cell in the fitting material: silicone rubber.
K1500AG        Set of 5 0-rings for sealing the cell in the fitting material: VITONTM.
K1500AH        One (1) KALREZTM 0-ring for sealing the cell in the fitting.