Yokogawa Conductivity Cable WU40[Product print page]

Yokogawa Conductivity Cable WU40                            

These cables are for use with the Yokogawa conductivity cells fitted with a cable connector. The plug/socket connection between cell and cable meets the requirements of IP65.

The connector of the cable has a secure screw connection with simple wiring mode. The gilded contacts ensure good electrical contact to the connector of the conductivity cell.

Yokogawa Conductivity Cable WU40 is six wire multicore and covered with a thermoplastic PVC. The wires are also covered with thermoplactic PVC individually and coloured.

Yokogawa Conductivity Cable WU40 connections are supplied with 2 mm contact pins for connection to the transmitter, preamplifier or connection box: these pins guarantee a correct and simple connection to the terminals.

Technical Specifications

Yokogawa Conductivity Cable WU40

Cable length : 1, 2, 51/2, 10, 15, 20 or 25 m

Temperature range : -10 ºC to +80 ºC

Wire resistances : approx. 18.10-3 Ω/m

Capacity core/core/screen : max. 130 pF/m

Isolation resistance between cores and screen : approx. 109 Ω/m (20 ºC)

Connector contact resistance : < 8 mΩ

Models and Suffix Codes

Yokogawa Conductivity Cable WU40

K1500FX         Set of 5 0-rings for sealing the cell in the fitting material: silicone rubber.
K1500AG        Set of 5 0-rings for sealing the cell in the fitting material: VITONTM.
K1500AH        One (1) KALREZTM 0-ring for sealing the cell in the fitting.