CENTUM
Yokogawa Single ER Bus Node Unit ANR11S
Node Unit for Single ER Bus (19” Rack Mountable)
The ESB Bus Node Unit has an interface function that
communicates the analog I/O signals and contact I/O
signals of a field with a Field Control Unit (FCU) via an
ESB bus, as well as a function that supplies power to the I/O Modules.
This node units are connected to FCU via an ESB bus.
Hardware Specifications
Yokogawa Single ER Bus Node Unit ANR11S
Node Connection
When connecting an ESB Bus Node Unit to FCU, install ESB Bus Couple Module (EC401 or EC402) to FCU (*1).
EC401 or EC402 must be installed in slot 7 and slot 8. To make single configuration, EC401 or EC402 must be installed in slot 7, and slot 8 must be empty.
*1: AFV30 , AFV40 , AFV10 , or AFF55 .
Power Supply
Yokogawa Single ER Bus Node Unit ANR11S
Specify with Suffix Codes
Voltage: 100-120 V AC, Frequency: 50/60 Hz
Voltage: 220-240 V AC, Frequency: 50/60 Hz
Voltage: 24 V DC
Electric Power Consumption
Yokogawa Single ER Bus Node Unit ANR11S
100-120 V AC: 200 VA, 120 W
220-240 V AC: 230 VA, 120 W
24 V DC: 5.5 A
l Weight
10 kg (including 8 I/O Modules)
Mounting
19-inch Rack Mounting
Rack mount (M5 x 4 screws)
Insulation bash (accessory)
Regulatory Compliance
Yokogawa Single ER Bus Node Unit ANR11S
For the detailed information of following standards, see “System Overview” (GS 33K01A10-50E).
Safety Standards
[CSA] (for 100-120 V AC and 24 V DC power supply)
[CE Marking] (for 100-120 V AC, 220-240 V AC and 24 V DC power supply)
EMC Conformity Standards
[CE Marking] (for 100-120 V AC, 220-240 V AC and 24 V DC power supply)
[C-Tick Marking] (for 220-240 V AC and 24 V DC power supply)
[KC Marking] (for 100-120 V AC, 220-240 V AC and 24 V DC power supply)
Standards for Hazardous Location Equipment
[CSA Non-Incendive] (for 100-120 V AC and 24 V DC power supply)
[FM Non-Incendive] (for 100-120 V AC, 220-240 V AC and 24 V DC power supply)
[Type n] (for 24 V DC power supply)
