Yokogawa Magnetic Flowmeter AXF010G-E2AL1L-DD41-02B
Yokogawa Magnetic Flowmeter AXF
Overview:
Yokogawa Magnetic Flowmeter AXF
Yokogawa Magnetic Flowmeter AXF010G-E2AL1L-DD41-02B series are sophisticated products with outstanding reliability and ease of operation, developed on the basis of decades of field- proven experience.
The combination of a replaceable electrode and the diagnostic to defect adhesion level on the electrodes dramatically improves maintainability.
The AXF010G-E2AL1L-DD41-02B employs the fluid noise free “Dual Frequency Excitation Method” and the newly added “Enhanced Dual Frequency Excitation Method” as an option for more difficult applications to ensure greater stability and quicker response.
Note: The “Dual Frequency Excitation Method” is
Yokogawa’s unique technology.
Fieldbus communication type is also available.
Refer to GS 01E20F02-01E for FOUNDATIONTM Fieldbus communication type and GS 01E20F12-01E for PROFIBUS PA communication type regarding the items marked with “<”.
MODEL AND SUFFIX CODE
Yokogawa Magnetic Flowmeter AXF010G-E2AL1L-DD41-02B
General-purpose Use/Submersible Type/Explosion proof Type, PFA/Polyurethane Rubber /Natural Soft Rubber/ EPDM Rubber Lining
*1: For a flange type of 2.5 to 10 mm (0.1 to 0.4 in.), prepare 15 mm (0.5 in.) diameter nominal flanges on the process pipe side. (Process connection codes: BA1, BA2, BD4, BJ1, and BJ2)
*2: Even when DIN PN10 or 16 is required for a model of size 2.5 to 50 mm (0.1 to 2.0 in.), select PN40 (Process connection codes: BD4,CD4 and DD4) because there is no difference in the dimensions of the mating faces.
Even when DIN PN10 is required for a model of size 65 to 150 mm (2.5 to 6.0 in.), select PN16 (Process connection codes: BD2 , CD2) because there is no difference in the dimensions of the mating faces.
*3: For a flange type of 2.5 to 10 mm (0.1 to 0.4 in)(Process connection codes: DJ1, DJ2, and DD4), prepare 10 mm (0.4 in.) diameter nominal flanges on the process pipe side.
*4: Mating dimensions are based on standards as follow:
ANSI:ASME B 16.5, DIN: DIN 2501, JIS:JIS B 2220 and JIS G 3443-2
*5: N shall be always selected for remote flowtubes
In the case of an integral flowmeter, select from among the figures at the right:
*6: For explosion proof types, specify types of explosion proof certification using the optional codes. In case of TIIS flameproof type, the remote flowtube is available only for combined use with the AXFA14. For the TIIS flameproof type with wiring using a flameproof packing adapter, select optional code G12 or G11. Available only for JIS G1/2 female electrical connections. Yokogawa Magnetic Flowmeter AXF010G-E2AL1L-DD41-02B
*7: For explosion proof types, JIS G1/2 female electrical connection is available only for TIIS flameproof type.
*8: In case of integral flowmeters of the TIIS flameproof type, select “with indicator”(code 1 or 2).
*9: Users must consider the characteristics of selected wetted parts material and influence of process fluids.
The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the instrument itself can be damaged and that fragments from the instrument can contaminate the user's process fluids. Yokogawa Magnetic Flowmeter AXF010G-E2AL1L-DD41-02B
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature
steam (150°C [302°F] or above).
Contact Yokogawa for detailed information of the wetted parts material.
*10:For FOUNDATION Fieldbus protocol, refer to GS 01E20F02-01E
*11: For PROFIBUS PA protocol, refer to GS 01E20F12-01E.
*12: Allowable fluid pressure should also be limited according to fluid temperature and pressure.
*13: In the case of calibration code C in remote type, please order a combination of flowtube and converter.
