Manufacturer: Yokogawa Electric Corporation
Yokogawa Duplexed Field Control Unit AFV10D-S41201
for Vnet/IP and FIO, with 19 inch rack mountable type
Hardware Specifications
Yokogawa Duplexed Field Control Unit AFV10D-S41201, for Vnet/IP and FIO, with 19 inch rack mountable type
For the installation specifications and the environmental conditions common to the systems, refer to “Vnet/IP System Overview (Vnet/IP Edition)” (GS 33K01A10- 50E).
Processor
VR5432 (133 MHz)
No. of Node Units Connectable
Max. 14/FCU
The total number of ESB Bus Node Units and ER Bus Node Units that can be connected to FCU are 14 or less. (ESB Bus Node Units: 9 or less)
LFS1500 allows up to 3 nodes, and can be expanded to 14 if LFS1550 Application capacity Expansion Package (for AFV10 ) is added.
To connect a node unit to the FCU, a Node Unit Expansion License (Option code: /NDEL) is required for the node unit.
Module configuration
Power Supply Module (PW481 or PW482 or PW484):
Two modules in case of a dual-redundant configuration.
Processor Module (CP451): Two modules in case of a dual-redundant configuration.
I/O Modules(*1): Max. 8
*1: Non-standard components.
ESB Bus Node Units Connection
Yokogawa Duplexed Field Control Unit AFV10D-S41201
When connecting an ESB Bus Node Unit to FCU, install ESB Bus Coupler Module (EC401) on FCU. EC401 must be installed in slot 7 and slot 8. For the dual-redundant configuration of the processor modules, EC401 must be installed in both slot 7 and slot 8.
In case ESB Bus has a single configuration, EC401 must be installed in slot 7 and keep slot 8 empty.
Regulatory Compliance
Yokogawa Duplexed Field Control Unit AFV10D-S41201
For the detailed information of following standards, see “System Overview (Vnet/IP Edition)” (GS 33K01A10-50E).
Safety Standards
[CSA] (for 100-120 V AC power supply)
[CE Marking] (for 220-240 V AC power supply)
EMC Conformity Standards
[CE Marking] (for 220-240 V AC and 24 V DC power supply)
[C-Tick Marking] (for 220-240 V AC and 24 V DC power supply)
[KC Marking] (for 220-240 V AC and 24 V DC power supply)
Standards for Hazardous Location Equipment
[FM Non-Incendive] (for 100-120 V AC, 220-240 V AC and 24 V DC power supply)
[Type n] (for 24 V DC power supply)
Models and Suffix Codes
Duplexed Field Control Unit
Yokogawa Duplexed Field Control Unit AFV10D-S41201
|
|
|
Description
|
|
Model
|
AFV10D
|
Duplexed Field Control Unit (for Vnet/IP and FIO, for 19-inch Rack Mountable)
|
|
Suffix
Codes
|
-S
|
Standard type
|
|
4
|
Dual-Redundant Vnet/IP, Dual-Redundant power supply
|
|
1
|
Always 1
|
|
1
|
100–120 V AC power supply
|
|
2
|
220–240 V AC power supply
|
|
4
|
24 V DC power supply
|
|
5
|
Basic type with no explosion protection
|
|
6
|
With ISA Standard G3 option and no explosion protection
|
|
E
|
Basic type with explosion protection
|
|
F
|
With ISA Standard G3 option and explosion protection
|
|
1
|
LFS1500 Control Function for Field Control Station (for Vnet/IP and FIO)
|
|
Option
Code
|
/ATDOC
|
Explosion Protection Manual (*1)
|
