Yokogawa Analog Output Module AAI543-H00/K4A00[Product print page]

Product Name: Yokogawa Analog Output Module AAI543-H00/K4A00

Product Type: AAI543-H00/K4A00

Exhibitors: Yokogawa

Product Documentation: No Related Documents

Brief

Yokogawa Analog Output Module AAI543-H00/K4A00 4 to 20 mA, 16-channel, Isolated, standard or fast switch-over response in redundant configuration Yokogawa Analog Output Module AAI543-H00/K4A00

Detailed description

Yokogawa Analog Output Module AAI543-H00/K4A00

Current Output Module (Isolated)

Yokogawa Analog Output Module AAI543-H00/K4A00 provides 16 outputs of 4 – 20 mA signal. Yokogawa Analog Output Module AAI543-H00/K4A00 can be used in dual-redundant configuration. (*1)

Items	Specifications
Model	AAI543-£5£/-£E£	AAI543-£6£/-£F£ (*2)
Number of output channels	16, isolated, standard switch-over response in redundant configuration (*3)	16, isolated, fast switch-over response in redundant configuration (*3)
Output signal	4 to 20 mA
Withstanding voltage	Between output and system: 1500 V AC, for 1 minute (*4)
Allowable load resistance	0 to 750 Ω
Circuit-open detection	Less than 0.65 mA
Accuracy	±48 µA
Data update period	10 ms
Drift due to ambient temperature change	±16 µA/10 ˚C
Maximum current consumption	230 mA (5 V DC), 540 mA (24 V DC)
Weight	Approx. 0.40 kg
External communication	Pressure clamp terminal, MIL connector cable, dedicated cable (KS1)
HART communication	Available

*1: A dual-redundant configuration is enabled by using two identical modules with the same suffix codes.

*2: When Yokogawa Analog Output Module AAI543-H00/K4A00 is installed in a node unit that conforms to the temperature environment, use it in the ambient temperature within 0 to 60 ºC range.

*3: When a switch over from control to stand-by module takes place in the dual-redundant configuration, the maximum period of time when the field output falls below 4 mA is 100 ms for Yokogawa Analog Output Module AAI543-H00/K4A00 (standard switch-over response) and 2 ms for AAI543-£6£/-£F£ (fast switch-over response). In case of connecting fast response type field devices, use AAI543-

£6£/-£F£ (fast switch-over response) in the dual-redundant configuration.

*4: When the dedicated cable is used, the withstanding voltage is 500 V AC (between the input signal and the system). When

the ML connector cable is used, the withstanding voltage depends on the electrical specifications of the cable.

MODEL AND SUFFIX CODES

Yokogawa Analog Output Module AAI543-H00/K4A00

		Description
Model	AAI543	Analog Output Module (4 to 20 mA, 16-channel, Isolated)
Suffix Codes	-S	Standard type
	-H	With digital communication (HART protocol)
	5	Standard switch-over response in redundant configuration with no explosion protection(*1)
	6	Fast switch-over response in redundant configuration with no explosion protection(*2)
	E	Standard switch-over response in redundant configuration with explosion protection(*1)
	F	Fast switch-over response in redundant configuration with explosion protection(*2)
	0	Basic type
	1	With ISA Standard G3 option
	3	With ISA Standard G3 option and temperature (-20 to 70 °C) option
Option Codes	/K4A00	With KS Cable Interface Adapter (For connecting AEA4D Terminal Board) [Model: ATK4A-00]
	/A4S00	With Pressure Clamp Terminal Block [Model: ATA4S-00]
	/A4S10	With Pressure Clamp Terminal Block (surge absorber) [Model: ATA4S-10]
	/A4D00	With Dual Pressure Clamp Terminal Block [Model: ATA4D-00]
	/A4D10	With Dual Pressure Clamp Terminal Block (surge absorber) [Model: ATA4D-10]
	/CCC01	With Connector Cover for MIL Cable [Model: ACCC01]

*1: If “standard switch-over response in redundant configuration” is selected, “basic type” or “with ISA Standard G3 option and temperature (-20 to 70 °C) option” may be specified.

*2: If “fast switch-over response in redundant configuration” is selected, “basic type” or “with ISA Standard G3 option” may be specified.