Yokogawa Conductivity Sensor SC4AJ-T-AD-15-002-03-T1/PS[Product print page]

Yokogawa Conductivity Sensor SC4AJ-T-AD-15-002-03-T1/PS                                     

General Specifications: 

Yokogawa Conductivity Sensor SC4AJ-T-AD-15-002-03-T1/PS

SC4AJ:

Cable with pin terminals (applicable to SC100, FLXA21, SC202G and SC202SJ)

Cable with M3 ring terminals (applicable to SC450G, SC202/TB)

Cable with M4 ring terminals (applicable to FLXA21) Object of measurement:

Conductivity of solutions Measuring principle : Two-electrode system Cell constant : 0.02cm-1, 0.1cm-1

Measuring range:

Yokogawa Conductivity Sensor SC4AJ-T-AD-15-002-03-T1/PS 

For a cell constant: 0.02cm-1

In case of the combination with the SC450G, FLXA21,SC202G or SC202SJ:

0 - 0.5   S/cm to 0 - 200   S/cm

In case of the combination with the SC100:

0 - 100   S/cm to 0 - 1 mS/cm

(Material: Titanium only, SC100 can not use with SC4AJ sensor made of SUS which cell constant is 0.02 cm-1.)

For a cell constant: 0.1cm-1

In case of the combination with the SC450G

, FLXA21,SC202G or SC202SJ:

0 - 5   S/cm to 1 mS/cm

In case of the combination with the SC100:

0 - 500   S/cm to 0 - 5 mS/cm

(Material: Titanium)

In case of the combination with the SC100:

0 - 500   S/cm to 1 mS/cm (Material: SUS) Temperature Range: For electrode, 0 to 110 C

Sterilization for electrode:135 C (275 F), within 30 minutes in Steam Sterilization

Pressure range : For electrode, 0 to 1 MPa

Sample solution condition:

Although flow rate is not limited in measurement, air bubbles should not be mixed in the sample solutions to obtain correct measured values.

Temperature sensor: Pt1000

Materials

Yokogawa Conductivity Sensor SC4AJ-T-AD-15-002-03-T1/PS 

Body & Electrode: SUS316L (for all Fitting-type) or Titanium (only for adapter mounting type-AD), Viton O-ring

Isolator : PEEK

Mounting adapter: Plyvinylidene difluoride (for /PF and / RF) or SUS316, SUS316L

Weight:

Sensors:

Adapter mounting type

(SC4AJ-S-AD-09-002-05):  approx.450 g

Adapter mounting type

(SC4AJ-S-AD-15-002-05):  approx.520 g

Welding socket type

(SC4AJ-S-SA-NN-002-05): approx.670 g

1 or 1.5 inch welding clamp type

(SC4AJ-S-SB-NN-002-05): approx.550 g

2 inch welding clamp type

(SC4AJ-S-SC-NN-002-05): approx.670 g

(Note) There are weightdifferences among SC4AJ sensors. In orderto know the more accurateweight of each type of sensors,please calculate it from following information. The cable weighs 75 g/m. The SC4AJ with 0.02cm-1 cell constant is 15 gram heavier than the SC4AJwith 0.1cm-1 cell constant. SUS314L electrodeis 40 g heavier than Titanium electrode.

Adapters:

Yokogawa Conductivity Sensor SC4AJ-T-AD-15-002-03-T1/PS

3/4NPT stainless steel adapter (/PS):a pprox. 110 g

R3/4 stainless steel adapter (/RS): approx. 110 g

3/4NPT PVDF adapter (/PF) : approx. 35 g

R3/4 PVDF adapter (/RF) : approx. 35 g

Straight welding socket (/SA1): approx. 300 g

Angle welding socket 15 (/SA2) : approx. 320 g

Welding clamp 1 inch (/SB1) : approx. 330 g

Welding clamp 1.5 inch (/SB2) : approx. 305 g

Welding clamp 2 inch (/SC1) : approx. 350 g

(Note) Do not submerge the sensor itselfin process water, as the seams between the mold and the metalof the sensor are not waterproof. 

Spare parts for SC4AJ

Yokogawa Conductivity Sensor SC4AJ-T-AD-15-002-03-T1/PS