Manufacturer: Yokogawa Electric Corporation
Yokogawa Control Bus Interface Card VF702
GENERAL
By installing the control bus interface card into the PCI Express slot of the PC/AT compatible computer, the computer is connected to V net.
FUNCTION
Interface between the PCI Express and V net
SPECIFICATIONS
Yokogawa Control Bus Interface Card VF702
Connection Specifications
Connection method: Connect a coaxial cable with Model YCB146,
T-type connector Transmission: 10BASE-2 compliance
Connector: BNC connector
Max. distance: 185 m (When using 10BASE-2 cable only)
PCI Express Specifications
Yokogawa Control Bus Interface Card VF702
Applicable revision: PCI Express CEM Specification 1.0a x1, 2.5 GT/s signaling
This card can be installed in any of the PCI Express slots x1 to x16.
This card cannot be installed in a PCI slot.
Voltage
Power supply voltage: 3.3 V ± 9 %
Current Consumption
Max. 2.4 A
Weight
Approx. 0.15 kg (T-type connector excluded)
External Dimensions
22 (w) *126.5 (H) *193.54 (D) mm
Regulartory Compliance
Yokogawa Control Bus Interface Card VF702
For the detailed information of following standards, see
“System Specifications” (GS 33G01B10-01E).
EMC Standards:
[CE Marking]
[C-Tick Marking]
COMPATIBILITY WITH VF701
Yokogawa Control Bus Interface Card VF702
• The V net interface of VF702 is compatible with that of VF701, so that a mixture of VF701-installed stations and VF702-installed stations is allowed on the same control bus.
• Setting the domain number and station number of a VF702 card can be performed in a same way as for a VF701 card.
• VF702 can be used in R3.05 or later.
