Yokogawa Unit SNT10D for Optical Bus Repeater Module[Product print page]

Yokogawa Unit SNT10D for Optical Bus Repeater Module

Unit for Optical Bus Repeater Module is a unit to install Optical ESB Bus Repeater Modules. There are two types of connection for the Unit: star type

connection and chain type connection.  The star type connection functions as a hub for ESB Bus.

 STANDARD SPECIFICATIONS

Yokogawa Unit SNT10D for Optical Bus Repeater Module

Power Supply Voltage

The power supply voltage is specified in the suffix codes.

Voltage: 100 to 120 V AC and 50/60 Hz frequency Voltage: 220 to 240 V AC and 50/60 Hz frequency Voltage: 24 V DC

Power Consumption

100 to 120 V AC specification: 200 VA

220 to 240 V AC specification: 230 VA

24 V DC specification: 5.5 A

Weight

CONFIGURATION

Module Configuration

Mounting Method

Rack mounting: Rack mount with four M5 screws

Insulation bushes (accessories) are used.

Applicable Standards

Refer to “ProSafe-RS Safety Instrumented System, Yokogawa Unit SNT10D for Optical Bus Repeater Module

Power supply module: Supplies power to Optical ESB Bus Repeater Modules

The power supply terminal uses M4 screws.

Optical ESB Bus Repeater Modules SNT401, SNT501, SNT411 or SNT511: Even number of modules for each models.

(Up to 10 modules in total)

RESTRICTIONS AND CAUTIONS FOR MOUNTING

Yokogawa Unit SNT10D for Optical Bus Repeater Module

Modules other than SNT401, SNT501, SNT411 and SNT511 cannot be mounted to Unit for Optical Bus Repeater Module.

MODEL AND SUFFIX CODES

Unit for Optical Bus Repeater Module

Yokogawa Unit SNT10D for Optical Bus Repeater Module

 Note: Be sure to mount a dummy cover on a slot that is not mounted with Optical ESB Bus Repeater module.