Yokogawa BRAIN Terminal BT200-N00[Product print page]

Yokogawa BRAIN Terminal BT200-N00

As a portable terminal, the Model BT200 BRAIN TERMINAL is used in combination with equipment using brain communication for setting, changing, displaying and printing out parameters such as tag number, output mode, and range, through simultaneous communication. It also monitors I/O values and self-check results, sets constantcurrent output , and allows zero adjustments. The Model BT200 BRAIN TERMINAL is used by connecting it between 4 to 20 mA DC signal transmission lines of the equipment or to a dedicated connector on the ESC (Signal Conditioner Communication Card) when the system is started up or maintained.

Features

Yokogawa BRAIN Terminal BT200-N00           

Online monitoring and communication

The modulated communication signal does not interrupt the 4 to 20 mA DC signals during communication

Common to all Yokogawa’s equipment

The Model BT200 BRAIN TERMINAL works with all equipment that uses BRAIN communication.

Easy of use

A large display (21 characters by 8 lines) eases setup and alteration procedures in English prompting interactive sequences.

Diagnostics/security with error messages

Self-check function

Security code protection of setpoints

Low battery voltage alarm

Automatic power-off

Printer (BT200-P00)

Printer prints out tag numbers and other parameters on the spot.

Intrinsic safety (Only for a without printer type)

CSA intrinsically safe approval.

Equipment Specifications

Yokogawa BRAIN Terminal BT200-N00

Applicable Equipment Remove:

DPharp, UNIDMARKII/COM, YA63, ADMAG, ADMAG AE, YEWFLO Style E, YT200, JUXTA, Signal Conditioner

Communication Signal Connection:

Dedicated cable, 1.1 m long (3.6 ft)

Communication Line:

Line length: Up to 2 km (1.24 mile) (0.75 to 1.25 mm2 instrumentation cable)

Load resistance: 250 to 600 _ (including cable resistance)

Load capacitance: 0.22 _F or less

Load inductance: 3.3 mH or less

Power line spacing: 15 cm (6 inch) or more (Avoid parallel wiring.)

EMC Conformity Standards

EN61326-1 Class A, Table2 (For use in industrial locations), EN61326-2-3

Display:

LCD dot matrix, 21 characters x 8 lines

Controls:

Membrane switches (four function keys, 20 general operation keys, and one power switch)

Printer (BT200-P00):

Thermal paper type

Power Supply:

Five AA 1.5 V dry alkali batteries (LR6/AM3 (N))

For Intrinsic safety type; Five

designated batteries (see OPTIONS)

Dimensions:

BT200-N00: 228 x 110 x 51 mm (9.0 x 4.3 x 2.0 inch)

BT200-P00: 321 x 110 x 61 mm (12.6 x 4.3 x 2.4 inch)

Approximate Weight:

BT200-N00: 510 g (1.12 lb)

BT200-P00: 700 g (1.54 lb)

Functional Specifications

Yokogawa BRAIN Terminal BT200-N00   

Basic Functions:

Setup, alteration, and display of parameters BRAIN communication.

Constant current output, Zero point adjustment

Additional Functions:

Batch upload/download of data

Setpoint Protection:

Security code entry is required to alter setpoints.

Battery Alarm:

An alarm message appearing on the LCD announces low battery voltages.

Automatic Power-off:

The terminal is switched off automatically if no key access is made for approximately 5 minutes.

LCD contrast adjustment

Printing (BT200-P00)

Model and Codes

Yokogawa BRAIN Terminal BT200-N00

Yokogawa IA Smart Communicator BT200

Part Numbers

Yokogawa BRAIN Terminal BT200-N00

Yokogawa IA Smart Communicator BT200