Yokogawa Primary Power Supply Bus Unit AEP7D-1E
GENERAL
This hardware GS covers the AEP7D-1E Primary Power Supply Bus Unit which distributes power to equipment mounted in the same cabinet. The AEP7D-1E is designed to operate from two independent power sources “A“ and “B” and provide seven sets of outputs corresponding to each input. (In the following diagram, the seven “A“ output ports correspond to the “A“ input terminal, and the seven “B“ output ports correspond to the “B“ input terminal, respectively.) If input terminals A and B are connected in parallel, as shown in the figure below, a single input provides 14 outputs.
HARDWARE SPECIFICATIONS
For common installation environmental conditions and standards conformed with, see “System Overview” (GS 33K01A10-50E, GS 33K01A20-50E). Electrical Specifications Item Description Model AEP7D-1E-1£ AEP7D-1E-2£ AEP7D-1E-4£ Input power supply voltage 100 to 120 V AC 220 to 240 V AC 24 V DC Withstanding voltage 1500 V AC 1500 V AC 500 V AC Max. Input current / Primary Power Supply Bus Unit 20 A 20 A 30 A Max. Input current / port 6 A 6 A 10 A Conforming standard Safety Standard [CSA] AEP7D-1E-1£, AEP7D-1E-4£ [CE Marking] AEP7D-1E-1£, AEP7D-1E-2£, AEP7D-1E-4£ EMC Standard [CE Marking] AEP7D-1E-1£, AEP7D-1E-2£, AEP7D-1E-4£ [C-Tick Marking] AEP7D-1E-2£, AEP7D-1E-4£ [KC Marking] AEP7D-1E-1£, AEP7D-1E-2£, AEP7D-1E-4£ Standard for Hazardous Location Equipment [CSA NI] AEP7D-1E-1£, AEP7D-1E-4£ [FM NI] AEP7D-1E-1£, AEP7D-1E-2£, AEP7D-1E-4£ [Type n] AEP7D-1E-4£ MODEL AND SUFFIX CODES
Item
Description
Model
AEP7D-1E-1£
AEP7D-1E-2£
AEP7D-1E-4£
Input power supply voltage
100 to 120 V AC
220 to 240 V AC
24 V DC
Withstanding voltage
1500 V AC
500 V AC
Max. Input current / Primary
Power Supply Bus Unit
20 A
30 A
Max. Input current / port
6 A
10 A
Conforming standard
Safety Standard
[CSA] AEP7D-1E-1£, AEP7D-1E-4£
[CE Marking] AEP7D-1E-1£, AEP7D-1E-2£, AEP7D-1E-4£
EMC Standard
[C-Tick Marking] AEP7D-1E-2£, AEP7D-1E-4£
[KC Marking] AEP7D-1E-1£, AEP7D-1E-2£, AEP7D-1E-4£
Standard for Hazardous Location Equipment
[CSA NI] AEP7D-1E-1£, AEP7D-1E-4£
[FM NI] AEP7D-1E-1£, AEP7D-1E-2£, AEP7D-1E-4£
[Type n] AEP7D-1E-4£
Primary Power Supply Bus Unit
AEP7D
Suffix
Codes
-1
100 - 120 V AC input
-2
220 - 240 V AC input
-4
24 V DC input
5
Basic type with no explosion protection
6
With ISA Standard G3 option and no explosion protection
E
Basic type with explosion protection
F
With ISA Standard G3 option and explosion protection
Contact Number: +86 13724889019 Email: tekrachel2024@163.com Web: www.tek-international.com WeChat: tekrachel tekrachel@163.com
Add.: Room 2401 Building D Greenland Central Plaza, Science City, Huangpu District, Guangzhou 510663, Guangdong Province, China.