Yokogawa Relay Output Module ADR541[Product print page]

Product Name: Yokogawa Relay Output Module ADR541

Product Type: ADR541

Exhibitors: Yokogawa

Product Documentation: No Related Documents

Brief

Yokogawa Relay Output Module ADR541 installed in the ESB Bus Node Unit (ANB10S, ANB10D), Optical ESB Bus Node Unit (ANB11S, ANB11D). Yokogawa Relay Output Module ADR541

Detailed description

Yokogawa Relay Output Module ADR541

GENERAL

Yokogawa Relay Output Module ADR541

This GS covers the hardware specifications of Yokogawa Relay Output Module ADR541 that can be installed in the ESB
Bus Node Unit (ANB10S, ANB10D), Optical ESB Bus Node Unit (ANB11S, ANB11D), and the Field Control Unit
(AFV30S, AFV30D, AFV40S, AFV40D).

Relay Output Module

Yokogawa Relay Output Module ADR541
The Relay Output Module outputs the 16-channel relay contact signals.
It can be used in dual redundant configuration.

Item	Specifications
Model	ADR541
Number of output channels	16
Rated applied voltage	24 to 110 V DC, 100 to 240 V AC, 50/60 Hz
Maximum load current (*1)	Resistive load: 24 V DC: 2.0 A/channel, 110 V DC: 0.4 A/channel 100 V AC: 2.0 A/channel, 220 V AC: 2.0 A/channel Inductive load: 24 V DC: 0.6 A/channel, 110 V DC: 0.1 A/channel 100 V AC: 1.0 A/channel, 220 V AC: 1.0 A/channel
Withstanding voltage	Between output signal and system: 2 kV AC, For 1 minute Between commons: 1.35 kV AC, For 1 minute, common minus (–) side every 8-channel
Functions Status output Pulse width output Time-proportioning output	ON/OFF status output function One-shot pulse width output function Time-proportioning ON/OFF
Output response time	12 ms or less (for status output) 20 ms or less (for mixed status and pulse outputs)
Pulse width	40 ms to 7200 s
Pulse width resolution	8 ms, but ON/OFF delay added for maximum 10 ms
Maximum current consumption	780 mA (5 V DC)
Weight	Approx. 0.30 kg
External connection	Pressure clamp terminal, Dedicated cable (AKB334)
Relay switching life	100000 operations (*2)

Note: The signals connected the same common should be the same phase when applying AC voltage.

*1: Maximum 8 A is allowed per common. Connect a spark killer diode when driving DC relay.
*2: The relay cannot be replaced with new one. If it comes to the end of its life, the module should be replaced.

MODELS AND SUFFIX CODES

Yokogawa Relay Output Module ADR541

		Description
Model	ADR541	Relay Output Module (16-channel, 24 to 110 V DC/100 to 240 V AC, Isolated)
Suffix Codes	-P	With pulse width output function/time-proportional output function
	5	Without status display; with no explosion protection
	E	Without status display; with explosion protection
	0	Basic type
	3	With ISA Standard G3 option and temperature (-20 to 70 °C) option
Option Code	/C4S70	With Pressure Clamp Terminal Block for Digital Input [Model : ATC4S-70]