Yokogawa Digital Output Module ADV557-SE0 [Product print page]

Product Name: Yokogawa Digital Output Module ADV557-SE0

Product Type: ADV557-SE0

Exhibitors: Yokogawa

Product Documentation: No Related Documents

Brief

Yokogawa Digital Output Module ADV557-SE0 install in the ESB Bus Node Unit (ANB10S, ANB10D), Optical ESB Bus Node Unit (ANB11S, ANB11D） Yokogawa Digital Output Module ADV557-SE0

Detailed description

Yokogawa Digital Output Module ADV557-SE0

GENERAL

Yokogawa Digital Output Module ADV557-SE0

This GS covers the hardware specifications of Yokogawa Digital Output Module ADV557-SE0 that can be installed in the ESB
Bus Node Unit (ANB10S, ANB10D), Optical ESB Bus Node Unit (ANB11S, ANB11D), and the Field Control Unit
(AFV30S, AFV30D, AFV40S, AFV40D).

Function Assignment in Digital Modules

Yokogawa Digital Output Module ADV557-SE0
Select the patterns for assigning functions channel-by-channel in digital modules.
The following table lists the correspondence between the module types and point modes.
Table: Correspondence Between the Module Types and Point Modes

Point Mode	Module Type
SI	Status input
PB	Pushbutton input
SO	Status output
PW	Pulse width output
TP	Time-proportioning ON/OFF output

Example:

Terminals 1 and 2	PW (one PW output, two contiguous terminal nos.)
Terminals 3 and 4	TP (two outputs, two contiguous terminal nos.)
Terminals 5 and 6	TP (two outputs, two contiguous terminal nos.)

Terminals 15 and 16	PW (one PW output, two contiguous terminal nos.)

Yokogawa Digital Output Module ADV557-SE0

For PW output, use two contiguous terminal numbers; the first of these must be odd-numbered. Also if SO and TP

terminals are used together with PW, individual terminals that are not PW can be either SO or TP terminals.