Product Information

Yokogawa Digital Input Module ADV151-E53 [Product print page]

Product Name: Yokogawa Digital Input Module ADV151-E53
Product Type: ADV151-E53
Exhibitors: Yokogawa
Product Documentation: No Related Documents

Brief

Yokogawa Digital Input Module ADV151-E53 install in the ESB Bus Node Unit (ANB10S, ANB10D), Optical ESB Bus Node Unit (ANB11S, ANB11D), and the Field Control Unit. Yokogawa Digital Input Module ADV15

 Detailed description

Yokogawa Digital Input Module ADV151-E53


GENERAL

Yokogawa Digital Input Module ADV151-E53

This GS covers the hardware specifications of Yokogawa Digital Input Module ADV151-E53 that can be installed in the ESB
Bus Node Unit (ANB10S, ANB10D), Optical ESB Bus Node Unit (ANB11S, ANB11D), and the Field Control Unit
(AFV30S, AFV30D, AFV40S, AFV40D).


Function Assignment in Digital Modules

Yokogawa Digital Input Module ADV151-E53
Select the patterns for assigning functions channel-by-channel in digital modules.
The following table lists the correspondence between the module types and point modes.
Table:  Correspondence Between the Module Types and Point Modes

Point Mode

Module Type

SI

Status input

PB

Pushbutton input

SO

Status output

PW

Pulse width output

TP

Time-proportioning ON/OFF output

 Example:

Terminals 1 and 2

PW (one PW output, two contiguous terminal nos.)

Terminals 3 and 4

TP (two outputs, two contiguous terminal nos.)

Terminals 5 and 6

TP (two outputs, two contiguous terminal nos.)

 

 

Terminals 15 and 16

PW (one PW output, two contiguous terminal nos.)


Yokogawa Digital Input Module ADV151-E53

For PW output, use two contiguous terminal numbers; the first of these must be odd-numbered. Also if SO and TP

terminals are used together with PW, individual terminals that are not PW can be either SO or TP terminals.