Yokogawa Flange differential pressure transmitter EJA210A-DMSD2D4A-92DN/D4[Product print page]

Yokogawa Flange differential pressure transmitter EJA210A-DMSD2D4A-92DN/D4 

OVERVIEW

Yokogawa Flange differential pressure transmitter EJA210A-DMSD2D4A-92DN/D4 

TYokogawa Flange differential pressure transmitter EJA210A-DMSD2D4A-92DN/D4 can be used to measure levels of densities of solidifying or precipitating liquids. Both output a 4 to 20 mA DC signal corresponding  to the measured differential pressure. Yokogawa Flange differential pressure transmitter EJA210A-DMSD2D4A-92DN/D4 feature remote setup and monitoring through communications with the BRAIN™ terminal and CENTUM CS™ or μXL™ or HART®  275 host.

PHYSICAL SPECIFICATIONS
Yokogawa Flange differential pressure transmitter EJA210A-DMSD2D4A-92DN/D4 
Wetted Parts Materials
High side:
See wetted parts materials of the model code
Low side: Diaphragm
Hastelloy C-276
Cover flange
SCS14A
Process Connector Gasket
PTFE Teflon

Bolting

SCM435, SUS630, or SUH660
Housing
Low copper cast-aluminum alloy with polyurethane paint (Munsell 0.6GY3.1/2.0)
Degrees of Protection
IP67, NEMA4X
Cover O-rings
Buna-N, fluoro-rubber (optional)
Name plate and tag
SUS304 or SUS316 (option)
Fill Fluid
Silicone, Fluorinated oil(option)
Weight
10.7 kg(23.6 lb) (Model EJA210A-DMSD2D4A-92DN/D4 with 3” ANSI 150 flange; without integral indicator and process connector.)
16.1 kg(35.5 lb) (Model EJA220A with 4” ANSI 150 flange, X = 100; without integral indicator
and process connector.)