Yokogawa Manual Setter YS1350-230
GENERAL
Yokogawa Manual Setter YS1350-230
The YS1350-230 is a manual setter that allows for manually
outputting setting signals to controllers and the like. The
YS1360 is a manual setter that allows for manually output-
ting operation signals to operation terminals.
The YS1350-230 and YS1360 include as standard an operation mode selector switch [cascade (C) and manual (M)], status input-based operation mode selector function, and opera- tion mode discrimination status output function.
The YS1350-230 and YS1360 offer high reliability thanks to Yokogawa’s proprietary technology, user friendliness, and expandability. The basic type conforming to the DIN short case size contributes to space saving for mounting, and complies with standards (CE, FM*, and CSA*). For easy replacement of earlier models requiring the same panel cutout dimensions and depth as those of earlier models are also offered. *: To be approved.
FEATURES
Yokogawa Manual Setter YS1350-230
▪ A full-dot, TFT LCD
Clear visibility of the display screen is ensured even in direct sunlight in the early morning and late afternoon.
The user can freely access a desired operation screen from meter, trend, bar graph, alarm, and event displays.
All parameters can be set via the front panel display.
▪ The parameters can all be set by operation on the front panel (no need to draw out the internal unit).
▪ Parameters can also be set using YSS1000 Setting
Software available separately.
▪ Can be driven by either an AC (100 V) or DC (24 V)
power supply. (Must be specified upon ordering if using a 220–240 V DC power supply.)
▪ Dust- and splash-proof IP54 compatible faceplate (for basic type only)
▪ Depth 250 mm (only for the basic type)
▪ No battery or capacitor is used for memory backup. No maintenance is required because batteries and backup capacitors are not used.
▪ CE mark (for basic types and YS100-compatible type only)
▪ FM non-incentive explosion protection (optional for basic types only) (To be approved)
▪ CSA non-incentive explosion protection (optional for basic type, compatible type for YS100 (with YS100 case))
(To be approved)
▪ Communication (option)
Ethernet (Modbus/TCP) (for basic types only)
RS485 (PC Link, Modbus, YS protocol, unavailable for YS80 internal unit-compatible type)
▪ Compatibility with the YS100 series
Setting and control operations can be done with the same feel. In the case of the basic type, terminal-to-ter- minal pitches differ but the signal-to-terminal arrange- ment is almost the same. The following functions are included to ensure compatibility with the SMST.
▪ Meter Display was added to the Operation Display.
▪ Housing for replacement purposes
(SHUP-000 separately available)
Model and Suffix Code
Yokogawa Manual Setter YS1350-230
|
Model
|
Suffix Code
|
Optional Code
|
Remark
|
|
YS1350-230
|
|
Manual setter for SV Setting
|
|
YS1360
|
|
Manual setter for MV Setting
|
|
Use
|
-1
|
YS1350-230: Always -1
YS1360: With hard manual unit
|
|
-2
|
YS1360 only: Without hard manual unit
|
|
Type
|
0
|
Basic type
|
|
2
|
YS100 compatible type (with YS100 case)
|
|
3
|
YS80 internal unit compatible type, EBS, I, EK, HOMAC compatible type (*1)
|
|
4
|
YS80 compatible type (YS 80 compatible size, YS100 terminal type)
|
|
5
|
100 Line compatible type (YS100 terminal type) (*2)
|
|
Power supply
|
0
|
100 VAC and 24 VDC common power supply
|
|
1
|
220 VAC power supply
|
|
Direct input (*3)
|
/A01
|
mV input
|
|
/A02
|
Thermocouple input
|
|
/A03
|
Resistance temperature detector input
|
|
/A04
|
Potentiometer input
|
|
/A05
|
Isolator
|
|
/A06
|
2-wire transmitter input (insulation type)
|
|
/A07
|
2-wire transmitter input (non-insulation type)
|
|
/A08
|
Frequency input
|
|
/DF
|
Direct input with Fahrenheit temperature range function (*9)
|
|
Communication
|
/A31
|
RS-485 communication (PC link, Modbus, YS protocol) (*4)
|
|
/A32
|
DCS-LCS communication (*5)
|
|
/A34
|
Ethernet communication (Modbus/TCP) (*6)
|
|
Certification
|
/FM
|
FM nonincendive approved (FM Class I, Division 2) (*7) (To be approved)
|
|
/CSA
|
CSA safety and nonincendive approved (Class I, Division 2) (*8) (To be approved)
|
|
|
|
|
|
|
|
*1: Can be connected with the YS80 housing (Model: SHUP-000). (The EK and HOMAC compatible housing SHUP-420 and EBS/I Series compatible hous-
ing SHUP-100 are available separately.)
*2: The 100 Line compatible housing (Model: YS006) is available separately.
*3: The direct input option can be added only for optional codes –x2x, -x4x, and -x5x. Multiple selections are not possible.
*4: A combination with suffix code “-x3x” is not possible. Optional codes /A31 and /A32 cannot be simultaneously specified.
Please specify the communication options /A31 (RS-485 communication) to directly communicate with the CENTUM CS3000/VP.
*5: Optional codes /A31 and /A32 cannot be simultaneously specified. Please specify the communication options /A32 (DCS-LCS communication) to com-
municate with the CENTUM CS3000/VP through the SCIU.
*6: Communication option /A34 can be specified only for suffix code –x0x.
*7: Can be added only for suffix code –x0x.
*8: Can be added only for suffix code –x0x and –x2x.
*9 This option can be combined only with option code /A02 or /A03.If option code /DF is specified, Fahrenheit temperature range can be available for direct input range in addition to Centigrade temperature range. In case of specifying Fahrenheit temperature range for direct input, option code /DF is required. When the direct input temperature range may be changed to Fahrenheit temperature range after shipment, also specify option code /DF.
Structure, Mounting (Basic type)
Yokogawa Manual Setter YS1350-230
|
Item
|
Specification
|
|
Structure
|
Front panel drip and dust proof structure (compliant with IP54). However, this structure cannot be used for side-by-side mounting instrumentation, and replace- ment types.
|
|
Mounting type
|
Indoor panel mounting
|
|
Panel mounting device
|
Mounting brackets to be used (at the top and bottom)
|
|
Panel cutout
|
137+2 x 68+0.7 (mm)
|
|
Connection method
|
External signal connection
|
M4 screw terminal connection
|
|
Power supply and ground connection
|
M4 screw terminal connection
|
|
Dimensions
|
144 × 72 × 250 mm (height × width × depth from the panel)
|
|
Weight
|
1.6 kg
|
