Yokogawa Program Controller UP55A-100-11-00[Product print page]

Product Name: Yokogawa Program Controller UP55A-100-11-00

Product Type: UP55A-100-11-00

Exhibitors: Yokogawa

Product Documentation: No Related Documents

Brief

Yokogawa Program Controller UP55A-100-11-00 employs an easy-to- read, 14-segment large color LCD display, along with navigation keys. Yokogawa Program Controller UP55A-100-11-00

Detailed description

Yokogawa Program Controller UP55A-100-11-00

Overview

Yokogawa Program Controller UP55A-100-11-00

The UP55A-100-11-00 program controller employs an easy-to- read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UP55A-100-11-00 also support open networks such as Ethernet communication.

Features

Yokogawa Program Controller UP55A-100-11-00

• A 14-segment, active (PV display color changing function) color LCD display is employed.
Two five-digit, high-resolution displays are possible. Alphabet letters can be displayed in an easy-to-read manner.
The guide display shows parameter names.
• Easy to operate
Navigation keys (SET/ENTER and Up/Down/Left/ Right arrow keys) are employed to facilitate making settings.
• 65 mm depth
The small depth enables the mounting in a thin and small instrumented panel.
• Ladder sequence function is included as standard. This function allows for creating a simple sequence control. Dedicated LL50A Parameter Setting Software (sold separately) allows for performing programming using a ladder language.
• Various built-in open network functions such as
Ethernet are available.
Easy connection with various vendors’ PLCs is possible.
• Quick setting function
Setting only the minimum necessary parameters for operation is possible. (For single-loop control only)
• Equipped with a multitude of functions
Universal I/O and eight control modes (cascade control, etc) are included as standard. PID control, heating/cooling control, feed forward control, etc. are available.

Construction, Installation, and Wiring

Yokogawa Program Controller UP55A-100-11-00

• Material: Polycarbonate (Flame retardancy: UL94V-0)
• Case color: White (Light gray) or Black (Light
Charcoal gray)
• Weight: 0.5 kg or less
• External dimensions (mm): 96 (W) × 96 (H) × 65 (depth from the panel face)
(Depth except the projection on the rear panel)
• Installation: Direct panel mounting; mounting bracket, one each for upper and lower mounting
• Panel cutout dimensions (mm): 92+0.8/0 (W) × 92+0.8/0 (H)
• Mounting attitude: Up to 30 degrees above the horizontal. No down
• Dust-proof and drip-proof: IP66 (for front panel) (Not available for side-by-side close mounting.)
ward titling allowed.
• Wiring: M3 screw terminal with square washer (for signal wiring and power wiring)

Model and Suffix Code

Yokogawa Program Controller UP55A-100-11-00

Model	Suffix code						Optional suffix code	Description
UP55A-100-11-00								Program Controller (provided with retransmission output or 15 V DC loop power supply, 8 DIs, and 8 DOs) (Power supply: 100-240 V AC) 30 program patterns / 300 program segments (Max. 99 segments per pattern)
Type 1: Basic control	-0							Standard type
	-1							Position proportional type
	-2							Heating/cooling type
Type 2: Functions (*1)		0						None
		1						Remote (1 additional aux. analog) input, 1 additional DI
		2						RS-485 communication (Max.19.2 kpbs, 2-wire/4-wire)
		3						10 additional DOs
		4						3 additional aux. analog inputs, 2 DIs and 5 DOs to be deleted
Type 3: Open networks			0					None
			1					RS-485 communication (Max.38.4 kbps, 2-wire/4-wire)
			2					Ethernet communication (with serial gateway function)
			3					CC-Link communication (with Modbus master function)
			4					PROFIBUS-DP communication (with Modbus master function)
			5					DeviceNet communication (with Modbus master function)
Display language (*2)				-1				English
				-2				German
				-3				French
				-4				Spanish
Case color					0			White (Light gray)
Case color					1			Black (Light charcoal gray)
Fixed code						-00		Always “-00”
Optional suffix codes							/DR	Additional direct input (TC and 3-wire/4-wire RTD) and current input to Remote (1 additional aux. analog) input, 1 DI to be deleted (*3)
							/HA	Heater break alarm (*4)
							/DC	Power supply 24 V AC/DC
							/CT	Coating (*5)

*1: When “3” is specified for the Type 2 code, only “0” can be specified for the Type 3 code.
*2: English, German, French, and Spanish can be displayed as the guide display.
*3: When any of “1” or “4” is specified for the Type 2 code, the /DR option can be specified.
*4: When “-0” is specified for the Type 1 code, the /HA option can be specified.
*5: When the /CT option is specified, the UP55A-100-11-00 does not conform to the safety standards (UL and CSA) and CE marking.