Yokogawa Program Controller UP55A[Product print page]

Product Name: Yokogawa Program Controller UP55A

Product Type: UP55A

Exhibitors: Yokogawa

Product Documentation: No Related Documents

Brief

Yokogawa Program Controller UP55A employs an easy-to- read, 14-segment large color LCD display, along with navigation keys. Yokogawa Program Controller UP55A

Detailed description

Yokogawa Program Controller UP55A

Overview

Yokogawa Program Controller UP55A

The UP55A program controller employs an easy-to- read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UP55A also support open networks such as Ethernet communication.

Features

Yokogawa Program Controller UP55A

• A 14-segment, active (PV display color changing function) color LCD display is employed.
Two five-digit, high-resolution displays are possible. Alphabet letters can be displayed in an easy-to-read manner.
The guide display shows parameter names.
• Easy to operate
Navigation keys (SET/ENTER and Up/Down/Left/ Right arrow keys) are employed to facilitate making settings.
• 65 mm depth
The small depth enables the mounting in a thin and small instrumented panel.
• Ladder sequence function is included as standard. This function allows for creating a simple sequence control. Dedicated LL50A Parameter Setting Software (sold separately) allows for performing programming using a ladder language.
• Various built-in open network functions such as
Ethernet are available.
Easy connection with various vendors’ PLCs is possible.
• Quick setting function
Setting only the minimum necessary parameters for operation is possible. (For single-loop control only)
• Equipped with a multitude of functions
Universal I/O and eight control modes (cascade control, etc) are included as standard. PID control, heating/cooling control, feed forward control, etc. are available.

Construction, Installation, and Wiring

Yokogawa Program Controller UP55A

• Material: Polycarbonate (Flame retardancy: UL94V-0)
• Case color: White (Light gray) or Black (Light
Charcoal gray)
• Weight: 0.5 kg or less
• External dimensions (mm): 96 (W) × 96 (H) × 65 (depth from the panel face)
(Depth except the projection on the rear panel)
• Installation: Direct panel mounting; mounting bracket, one each for upper and lower mounting
• Panel cutout dimensions (mm): 92+0.8/0 (W) × 92+0.8/0 (H)
• Mounting attitude: Up to 30 degrees above the horizontal. No down
• Dust-proof and drip-proof: IP66 (for front panel) (Not available for side-by-side close mounting.)
ward titling allowed.
• Wiring: M3 screw terminal with square washer (for signal wiring and power wiring)

Model and Suffix Code

Yokogawa Program Controller UP55A

Model	Suffix code						Optional suffix code	Description
UP55A								Program Controller (provided with retransmission output or 15 V DC loop power supply, 8 DIs, and 8 DOs) (Power supply: 100-240 V AC) 30 program patterns / 300 program segments (Max. 99 segments per pattern)
Type 1: Basic control	-0							Standard type
	-1							Position proportional type
	-2							Heating/cooling type
Type 2: Functions (*1)		0						None
		1						Remote (1 additional aux. analog) input, 1 additional DI
		2						RS-485 communication (Max.19.2 kpbs, 2-wire/4-wire)
		3						10 additional DOs
		4						3 additional aux. analog inputs, 2 DIs and 5 DOs to be deleted
Type 3: Open networks			0					None
			1					RS-485 communication (Max.38.4 kbps, 2-wire/4-wire)
			2					Ethernet communication (with serial gateway function)
			3					CC-Link communication (with Modbus master function)
			4					PROFIBUS-DP communication (with Modbus master function)
			5					DeviceNet communication (with Modbus master function)
Display language (*2)				-1				English
				-2				German
				-3				French
				-4				Spanish
Case color					0			White (Light gray)
Case color					1			Black (Light charcoal gray)
Fixed code						-00		Always “-00”
Optional suffix codes							/DR	Additional direct input (TC and 3-wire/4-wire RTD) and current input to Remote (1 additional aux. analog) input, 1 DI to be deleted (*3)
							/HA	Heater break alarm (*4)
							/DC	Power supply 24 V AC/DC
							/CT	Coating (*5)

*1: When “3” is specified for the Type 2 code, only “0” can be specified for the Type 3 code.
*2: English, German, French, and Spanish can be displayed as the guide display.
*3: When any of “1” or “4” is specified for the Type 2 code, the /DR option can be specified.
*4: When “-0” is specified for the Type 1 code, the /HA option can be specified.
*5: When the /CT option is specified, the UP55A does not conform to the safety standards (UL and CSA) and CE marking.